Warning
There is no way to add more items to your cart than are in stock.
Calibrated steel circle (diameter 16-25 mm)
GOST
Product characteristics
An allowance of 2 mm is required, turning in 1 pass.
The calibrated steel circle meets the norms and requirements of the state standard.
The product is made by cold drawing with subsequent calibration from structural carbon steel and is a solid rod with a round cross-section.
The calibrated steel circle meets the norms and requirements of the state standard.
The product is made by cold drawing with subsequent calibration from structural carbon steel and is a solid rod with a round cross-section.
Price on request
To order
Customer material requirements:
- Range of rod diameter, mm: 17-58
- Range of rod length, mm: 3000-10000
- Tensile strength, MPa: up to 950
- Hardness: less than HB 300
- Rolled curvature, mm/m: less than 1
- Diameter tolerance: A according to GOST 2590-2006
- Roundness, mm: less than 0.05
- Roughness: less than 25-50 microns
Self-pickup or delivery to the customer's warehouse is possible.